A capability procedure is a formal process some UK employers use when the problem is poor performance at work — a person’s ability to do the job to the required standard — rather than misconduct. Some organisations handle poor performance under their disciplinary policy instead. Either way, the Acas Code of Practice on disciplinary and grievance procedures says the basic principles of fairness in the Code should still be followed, even if they need to be adapted.
Not legal advice. This page is general information for People leaders at UK scale-ups, written for England, Scotland and Wales using Acas guidance. It is not legal advice. Follow your own written policy, Acas, and the law that applies to the person, and take advice where you need it — especially before any warning or dismissal. Northern Ireland has its own employment law and institutions; this page does not set out the Northern Ireland position.
The page is for CPOs and People leaders at 200–2,000-person UK companies whose managers have already had informal conversations, or have been told to “start capability”, and who need a fair, documented sequence they can explain. It sets out how a capability procedure differs from a performance improvement plan (PIP), what happens at a capability meeting, and what the letters should cover. Disclosure: Ash Taherian is Product Sales Executive at Revolut People, which sells performance management software. Treat product mentions as coming from an interested party.
What a capability procedure is (UK, poor performance)
Acas separates two kinds of performance problem. In its guidance on problems with an employee’s performance (last updated 23 June 2026, checked 13 November 2026), a capability issue is about someone’s ability to do their job; a conduct issue is about their behaviour at work. Which kind of problem it is affects how the employer should respond.
Acas’s disciplinary procedure step-by-step (last updated 4 December 2025, checked 13 November 2026) describes a disciplinary procedure as a formal way to deal with misconduct or capability, and says some employers use a separate “capability procedure” instead. That procedure must still be in line with the Acas Code. Acas’s page on dismissals for capability or conduct (last updated 23 June 2026, checked 13 November 2026) adds that if an employer has its own procedure — for example a separate capability procedure for poor performance — the employer must follow it.
So the practical first question for a scale-up is simple: do you have a written policy that covers poor performance? The Code says rules and procedures should be set down in writing, be specific and clear, and that employees and managers should understand what they are and where to find them. If you do not have one yet, get one written and checked before you need it. Do not invent formal stages in the middle of a live case.
A fair paper trail also matters sooner than it used to. The Playbook’s UK probation review guide covers the change on 1 January 2027: from that date, most employees in England, Scotland and Wales will be able to claim ordinary unfair dismissal after six months’ service, instead of the usual two years; the guide notes that the change does not apply in Northern Ireland. Read the detail there; this page does not repeat it.
What this page is not
- Not ill-health or long-term sickness capability. That is a different process. Acas says that if sickness prevents someone doing their job, the employer should take steps to support a return to work, and that if a condition is a disability, the employer must make reasonable adjustments. GOV.UK says that if a capability issue is linked to health, you should try as many ways as possible to help the person do their job before dismissing them. Take advice.
- Not the DWP Work Capability Assessment or Personal Independence Payment. Those are benefits processes, unrelated to employment.
- Not an NHS, university or teaching-union policy reprint. Those are written for their own sectors and agreements.
- Not a misconduct guide. Capability is about whether someone can meet the standard; misconduct is about behaviour. Acas notes the two can overlap — for example, lateness that turns out to be linked to a disability. If you are unsure which you are looking at, stop and get advice rather than picking a process to fit an outcome.
How it differs from a performance improvement plan
A performance improvement plan (PIP) is a written plan: the gap, the standard, specific objectives, the support offered, a reasonable timeline, and what happens if the objectives are met, partly met or missed. A capability procedure is the formal process around that plan: written notice of the concern, a meeting, a chance to respond, a written outcome, and an appeal.
Acas treats a PIP as a step an employer could consider if informal steps do not work, and says it is sometimes called a training or development plan. It should set out specific objectives, a reasonable timeline and any further support or training, and the employer should talk it through with the employee and ideally share a written record. A PIP is guidance, not a statute, and it does not replace a fair procedure.
In plain terms: many scale-ups will use a PIP inside a capability process. The plan is the content; the procedure is the fair way of reaching and recording decisions about it. For the plan itself, use the Playbook’s PIP template for UK managers, including its check on whether a PIP is the right step at all. This page does not repeat that template.
Start informal, and write it down
Acas asks employers to try to understand why performance has slipped and to help someone improve before a formal procedure — for example coaching, mentoring or training. It says employers must provide “adequate resources” for an employee to do their job, which might include training, and that it is important to keep a record of any conversations about performance. Acas’s disciplinary guidance also suggests trying to resolve things informally first: talk privately, listen to the employee’s point of view, agree improvements, and set up a training or development plan if it is a performance issue.
That informal stage belongs in regular one-to-ones, not in a surprise formal meeting. The one-to-one meeting template gives managers a shared agenda and shows what a useful note looks like: a date, a piece of work, an agreed action. Formal reviews add to the trail — see the year-end review guide and performance review examples for evidence-based wording.
Before anyone calls it a capability problem, check it is one person’s skill gap and not a team capacity, priority or burnout problem. The team performance diagnostic is built for that question. And check the standard itself: if a manager’s “poor performance” rating has never been compared with other managers’ ratings, test it in calibration first (see how to run a calibration meeting).
The failure mode to prevent is the formal capability meeting that arrives with no written evidence and no record of support offered.
Stages of a fair process
There is no single official “stage 1, stage 2, stage 3” capability scheme in UK law, and this page does not invent one. GOV.UK’s guidance on dismissals for conduct or performance reasons (checked 13 November 2026) says there is no specific process you must go through by law, as long as you do it fairly. Your own policy sets the stages. What follows is a practical sequence to map onto that policy, with each step tied to official guidance:
- Informal help and a record. Understand the cause, offer support and resources, and keep notes of the conversations (Acas).
- A written improvement plan, if informal steps are not enough. Specific objectives, a reasonable timeline and support, discussed with the employee (Acas). Use the PIP template.
- If the issue continues, a formal process that follows the Code’s basic principles. The Code’s fairness elements include: deal with issues promptly; act consistently; carry out any necessary investigation to establish the facts; tell the employee the basis of the problem and give them an opportunity to put their case before any decision; allow them to be accompanied at any formal disciplinary or grievance meeting; and allow an appeal against any formal decision.
- Written notice, a meeting, a written decision, and an appeal. Covered in the next two sections.
- If performance still does not improve. Acas says the employer should make clear what will happen — for example an extension to the PIP timeline if the person improves but not to the agreed level, or a final written warning followed by dismissal if the issue continues — and that dismissal should be a last resort, reached only through a fair procedure. Before that point, Acas’s capability-dismissal guidance says employers should try changing the person’s duties, if possible, or finding a different role, and that any dismissal needs evidence of both the poor performance and the steps taken to support improvement.
The Code itself notes that what is reasonable depends on all the circumstances, and that tribunals take an employer’s size and resources into account. That is not a reason to skip steps; it is a reason to write a policy that fits your organisation and follow it consistently.
What happens at a capability meeting
A running order for the formal meeting, written for the People lead and the manager. Adapt it to your policy.
- Purpose and possible consequences. Restate why you are meeting and what could follow, as set out in the invite letter. No surprises.
- The evidence. Go through dated examples against a published standard — the rating scale or the role’s scorecard — rather than impressions. The Code says that at the meeting the employer should explain the concern and go through the evidence gathered.
- The employee’s response. The Code says the employee should be allowed to set out their case, ask questions, present evidence and call relevant witnesses. Listen; this is where causes such as workload, unclear priorities or a health issue often surface.
- Support offered, and what else is reasonable. What training, coaching or resources have been provided, and is anything else reasonable — including reasonable adjustments if disability may be involved?
- The next step. Continue informally, start or extend a PIP, a warning under your policy, or — only with advice and after a fair process — a later decision about dismissal. You do not have to decide in the room; the Code expects a decision in writing after the meeting.
Meeting questions should be open and specific, not a cross-examination: “What has got in the way of the standard we set on [date]?”, “What support has helped, and what hasn’t?”, “Is there anything affecting your work that we should know about?”, “What would you need to meet the objective by the review date?”
The right to be accompanied. The Code says workers have a statutory right to be accompanied by a companion where a disciplinary meeting could result in a formal warning, some other disciplinary action, or the confirmation of a warning or other action at an appeal. The companion can be a fellow worker, a trade union representative, or an official employed by a trade union. If the chosen companion cannot attend, the Code says the employer must postpone to a reasonable time the worker proposes, within five working days of the original date. The Code also says there is no statutory right to be accompanied at a formal investigatory meeting, though an employer’s own procedure may allow it. GOV.UK puts it more broadly: employees have the right to be accompanied to all disciplinary meetings. Check what your policy says and how it applies to a capability meeting.
Notes. GOV.UK says to keep notes of all meetings and give copies to the employee.
If the employee refuses the plan. Refusing to sign a PIP, or disputing it, does not stop a fair process, but it should change how carefully you run the next step. See Can an employee refuse a performance improvement plan in the UK?
Invite and outcome letters: a checklist
This is a checklist of what the written invite and outcome should cover, drawn from the Code, Acas and GOV.UK. Two items — who will attend, and who to contact with questions — are practical good practice rather than a quoted requirement. It is not a fill-in legal template and does not guarantee compliance. Use your company’s own templates and take advice.
| Invite letter (before a formal meeting) | Outcome letter (after the meeting) |
|---|---|
| That there is a performance concern to discuss under your policy, with enough information about it for the person to prepare | The decision, and the reasons for it |
| The possible consequences (for example, a written warning) | Any plan: the improvement required, support offered, and the timescale and review dates |
| Copies of the written evidence you will rely on | For a warning: how long it stays current, and the consequences of not improving within that period |
| Date, time and place or link for the meeting, with reasonable time to prepare | How to appeal, and to whom |
| Who will be there | A copy of the meeting notes |
| The right to be accompanied, where it applies | Who to contact with questions, and any wellbeing support available |
Sources for the checklist: the Code (written notification with sufficient information about the poor performance and its possible consequences, copies of written evidence, time and venue, the right to be accompanied, reasonable time to prepare; decisions in writing; warnings that set out the improvement required with a timescale, how long the warning remains current and the consequences of failing to improve; and the right of appeal); Acas’s step 2: following a fair procedure (last updated 4 December 2025, checked 13 November 2026), which also asks employers to keep talking with the employee and to consider their wellbeing; and GOV.UK on notes.
How long a capability process takes
There is no single statutory length, and this page does not set a 30-, 60- or 90-day rule. Acas asks for a reasonable timeline on a PIP, and the Code asks employers not to unreasonably delay meetings, decisions or confirmation of decisions. The Playbook’s PIP page uses a six-week plan as its own starting point and is clear that it is a practical guideline, not a legal requirement — see the PIP template. How long the wider process takes depends on the role, how often the relevant work comes round, the support offered, and your policy.
Common mistakes
- Skipping the informal stage and going straight to a formal meeting.
- Starting formal capability with no written evidence and no record of support offered.
- Using a PIP to document an exit that is already decided. The PIP page warns against this too.
- Treating ill-health as a poor-performance case, or missing a possible disability and reasonable adjustments.
- Mixing misconduct into the same meeting as a capability concern.
- Cancelling the support, then failing the person for not meeting the objectives.
- Applying the policy inconsistently. Acas asks employers to follow the procedure in the same way for each case.
- Copying an NHS or university policy wholesale and assuming it fits a 200–2,000-person scale-up.
Where Revolut People fits
There is no capability-procedure or disciplinary module to point to here, and software does not make a process fair. The fair procedure, the decision and the advice stay with your People team and your policy.
Two things a shared record can help with. First, informal records: regular 1:1 notes and actions, as described on the one-to-one meeting template page. Second, the plan itself: the PIP page describes, from Revolut People’s public documentation, how PIPs can be created and tracked with goals, checkpoints and a final decision, and how team owners can see a PIP pipeline. Those are product behaviours, not a substitute for Acas or your policy.
If you want a second look at your process, book a 15-minute review with Ash, Product Sales Executive. Bring your current policy and a recent case with names removed. It is a fit-check, not legal advice, and not a trial.
FAQ
What is a capability procedure in the UK?
A capability procedure is a formal process some UK employers use when the issue is a person’s ability to do the job to the required standard, rather than misconduct. Some organisations handle poor performance under their disciplinary policy instead. In either case, the Acas Code of Practice on disciplinary and grievance procedures says the basic principles of fairness should still be followed. This is general information, not legal advice; follow your own policy and take advice where you need it.
How does a capability procedure differ from a performance improvement plan?
A performance improvement plan (PIP) is the written plan — the gap, specific objectives, the support and a reasonable timeline. A capability procedure is the formal process around it: written notice, a meeting, a chance to respond, a written outcome and an appeal. Acas treats a PIP as a step an employer could consider if informal steps have not worked. It is not a legal requirement and it does not replace a fair procedure. Use the Playbook’s PIP template for the plan itself.
Is there an official Acas capability procedure?
Not as a separate document. Acas covers poor performance in its guidance on problems with an employee’s performance, its disciplinary procedure step-by-step, and the Code of Practice on disciplinary and grievance procedures. Acas says an employer’s separate capability procedure must still be in line with that Code.
What are the stages of a capability procedure?
Your own written policy sets the stages; GOV.UK says there is no specific process you must follow by law, as long as you act fairly. A practical sequence is: informal help and a written record; a written improvement plan if informal steps are not enough; then, if the issue continues, a formal process that follows the Acas Code — written notice with the evidence, a meeting, a chance to respond, a written decision and an appeal. Acas says dismissal should be a last resort and only after a fair procedure.
What happens at a capability meeting?
The employer explains the concern and goes through the evidence; the employee sets out their case, asks questions and can present evidence; the meeting covers the support already given and what else is reasonable; and the next step is confirmed in writing afterwards. Where the meeting could lead to a formal warning or other disciplinary action, the Acas Code says workers have a statutory right to be accompanied. Keep notes and give the employee a copy.
How long does a capability process take?
There is no single statutory length. Acas asks for a reasonable timeline on a performance improvement plan, and the Code asks employers not to delay meetings or decisions unreasonably. The length depends on the role, how often the relevant work comes round, the support offered and your policy. The Playbook’s six-week PIP starting point is a guideline, not a legal requirement.
What should be in a capability meeting invite or outcome letter?
The invite should give enough information about the concern and its possible consequences for the person to prepare, copies of the evidence, the date, time and place, and the right to be accompanied where it applies. The outcome should give the decision and reasons, any plan with the improvement required and a timescale, how long any warning stays current and what happens if there is no improvement, and how to appeal. Use your own templates and take advice; this is a checklist, not a legal template.
Is a capability procedure the same as a PIP?
No. A PIP is a plan; a capability procedure is a formal process. Many employers use a PIP inside a capability process. See the PIP template for UK managers.
Related guides
PIP template for UK managers · UK probation reviews · one-to-one meeting template · team performance diagnostic · underperformance, pay and 1:1s · staff appraisal template (UK) · performance review template · employee performance rating scales · performance management framework · development plans and career conversations · free Playbook tools